ACCU DYNE TEST ™ Bibliography

Provided as an information service by Diversified Enterprises.

2571. Schubert, G., “Adhesion to foil: More than just a one-sided story,” in 2008 PLACE Conference Proceedings, 1123-1152, TAPPI Press, Sep 2008.

2576. Cernakova, L., P. Stahel, C. Kovacik, K. Johansson, and M. Cernak, “Low-cost high-speed plasma treatment of paper surfaces,” in Proceedings of the 9th TAPPI Advanced Coating Fundamentals Seminar, 7-17, TAPPI Press, 2006.

2583. Halle, R.W., “Polymer and processing parameters influencing the heat sealability of polyethylene,” in 1989 Polymers, Laminations and Coatings Conference Proceedings, 799-806, TAPPI Press, 1989.

2742. Weber, R., “Saturation phenomena in conjunction with corona treatment on different substrates,” in 2005 PLACE Conference Proceedings, 1213-1216, TAPPI Press, Sep 2005.

2743. DiGiacomo, J.D., and D. Medina, “Flame plasma surface treating system applied to a high speed coating line,” in 2005 PLACE Conference Proceedings, 578-590, TAPPI Press, Sep 2005.

2744. Eckert, W., “Printing on metalized polymer-paperboard compounds: Improvement of adhesion by optimized flame plasma pre-treatment,” in 2005 PLACE Conference Proceedings, 591-595, TAPPI Press, Sep 2005.

2745. Wolf, R.A., “Troubleshooting corona treatment issues,” in 2006 PLACE Conference Proceedings, 387-388, TAPPI Press, Sep 2006.

2746. Wolf, R.A., and R.E. Elwanger, “Clear barrier at atmospheric pressure,” in 2006 PLACE Conference Proceedings, 487-489, TAPPI Press, Sep 2006.

2747. Allen, R., “How to obtain good adhesion of extruded polypropylene to film and foil substrates by using ozone and primers,” in 2006 PLACE Conference Proceedings, 1354-1359, TAPPI Press, Sep 2006.

2748. Culbertson, E., “Metal adhesion to PET film,” in 2007 PLACE Conference Proceedings, 243-246, TAPPI Press, Sep 2007.

2749. Wolf, R.A., and A.C. Sparavigna, “Modifying surface features: Extrusion coating and laminating,” in 2007 PLACE Conference Proceedings, 881-884, TAPPI Press, Sep 2007.

2750. Wolf, R.A., “Clear barrier at atmospheric pressure - the second phase,” in 2007 PLACE Conference Proceedings, 1271-1276, TAPPI Press, Sep 2007.

2751. Smallshaw, J., “Corona treating and the printing process,” in 1999 Polymers, Laminations and Coatings Conference Proceedings, TAPPI Press, Sep 1999.

2752. Ping-yi Tsai, P., “Mechanism of corona electrostatic charging of nonwoven webs,” in 1994 Nonwovens Conference Proceedings, TAPPI Press, 1994.

2754. Kuusipalo, J., and A. Savolainen, “Adhesion in extrusion coating with polypropylene,” in 1993 Polymers, Coatings and Laminations Conference Proceedings, 469-478, TAPPI Press, Aug 1993.

2755. Jadon, N., and M.D. Nolan, “Exploring the benefits of newly developed adhesion promotion methods,” in 1998 Polymers, Laminations and Coatings Conference Proceedings, 1109-1118, TAPPI Press, Sep 1998.

2756. Lahti, J., “The role of surface properties in digital printing on extrusion coated paperboard,” in Proceedings of the 9th TAPPI Advanced Coating Fundamentals Symposium, TAPPI Press, 2006.

2757. Weber, R., “Saturation phenomena in conjunction with corona treatment on different substrates,” in 2005 European PLACE Conference Proceedings, TAPPI Press, 2005.

2758. Lahti, J., “The effects of corona and flame treatment II: PE-HD and PP coated papers,” in 12th TAPPI European PLACE Conference Proceedings, TAPPI Press, May 2009.

2759. Arlt, G., “Treatment electrode topology - some secrets for success,” in 9th TAPPI European PLACE Conference Proceedings, TAPPI Press, 2003.

2760. Campbell, R.N., and D. Wolters, “Improved barrier properties with metallized films from corona process improvements and from copolymer characteristics,” in 1998 Polymers, Coatings and Laminations Conference Proceedings, 385-396, TAPPI Press, Sep 1998 (also in J. Plastic Film and Sheeting, V. 16, p. 108-123, Apr 2000).

2761. Sherman, P.B., “Technical tips on corona treatment on polymeric films,” in 1997 Polymers, Laminations and Coatings Conference Proceedings, 111-120, TAPPI Press, Aug 1997.

2762. Eckert, W., “Comparison of corona and flame treatment of polymer film, foil and paperboard,” in 2005 European PLACE Conference Proceedings, TAPPI Press, 2005.

2763. Markgraf, D.A., “Corona treatment: An adhesion promoter for water-based & UV-cured printing,” in 1996 New Printing Technologies Symposium Proceedings, TAPPI Press, 1996.

2764. Cramm, R.H., “The influence of processing conditions on the hot tack of polyethylene extrusion coatings,” in 1988 Polymers, Laminations and Coatings Conference Proceedings, 35-39, TAPPI Press, 1988 (also in TAPPI J., V. 72, p. 185-189, Mar 1989).

2779. Gupta, B.S., and H.S. Whang, “Surface wetting and energy properties of cellulose acetate, polyester, and polypropylene fibers,” in 1998 Nonwovens Conference and Trade Fair, 65-78, TAPPI Press, 1998.

2782. Etzler, F.M., M. Buche, J.F. Bobalek, and M.A. Weiss, “Surface free energy of paper and inks: Printability issues,” in 1995 Papermakers Conference Proceedings, 383-394, TAPPI Press, 1995.

2785. Seppanen, R., M. Sundin, A. Swerin, and B. Brandner, “Relation between surface energy, topography, wettability and detailed surface chemistry by spectroscopy for coated printing papers,” in 2008 Advanced Coating Fundamentals Symposium, TAPPI Press, 2008.

2788. Rebros, M., P.D. Fleming, and M.K. Joyce, “UV-insk, substrates and wetting,” in 2006 Coating & Graphic Arts Conference, TAPPI Press, 2006.

2790. Tietje, A., “Fifteen years of ozone treatment in extrusion coating,” in 1987 Polymers, Laminations and Coatings Conference Proceedings, 221-224, TAPPI Press, Aug 1987.

2496. Ala-Kuha, A., “The influence of surface treatment on the polyolefin coating (Master's thesis),” Tampere University of Technology, Nov 2011.

2579. Tuominen, M., “Adhesion in LDPE coated paperboard (Lic. thesis),” Tampere University of Technology, 2007.

2581. Lahti, J., “Dry toner-based electrophotographic printing on extrusion coated paperboard (PhD thesis),” Tampere University of Technology, 2005.

2871. Rong, X., and M. Keif, “A study of PLA printability with flexography,” Presented at 59th Annual Technical Association of Graphic Arts Technical Conference Proceedings, Mar 2007.

952. Liebel, G., “Plasma activation: Industrial technology for large-scale treatment of polypropylene, polyethylene and polypropylene/ethylene-propylene terpolymer (EPDM) parts,” Technics Plasma, 0.

167. Ikada, Y., and Y. Uyama, Lubricating Polymer Surfaces, Technomic, Jan 1993.

169. Inagaki, N., Plasma Surface Modification and Plasma Polymerization, Technomic, Mar 1996.

426. Boenig, H.V., ed., Advances in Low-Temperature Plasma Chemistry, Technology, Applications, Technomic, 1988.

457. Miller, A., “Unit operation 1 - surface treatment of substrates,” in Converting for Flexible Packaging, 23-34, Technomic, 1994.

856. de Mendez, M., J.C. Boeda, G. Legeay, J.C. Brosse, and P. Simon, “Low temperature plasma modification of polysiloxanes,” in Advances in Low-Temperature Plasma Chemistry, Technology, Applications, Boenig, H.V., ed., 229-242, Technomic, 1988.

<-- Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | Next-->