ACCU DYNE TEST ™ Bibliography

Provided as an information service by Diversified Enterprises.

1113. Yializis, A., and D.A. Markgraf, “Atmospheric plasma - the new functional treatment for films,” in 2000 Polymers, Laminations and Coatings Conference Proceedings, TAPPI Press, Sep 2000.

1114. Greig, S., and N. Jadon, “Corona, ozone and flame treaters for extrusion coating lines,” in 8th European Polymers, Films, Laminations and Extrusion Coatings Conference, TAPPI Press, May 2001.

1338. Rodriguez, J.M., “Mechanisms of paper and board wetting,” in The Sizing of Paper, 3rd Ed., Gess, J.M., and J.M. Rodriguez, eds., 9-25, TAPPI Press, Sep 2005.

1383. Lindland, T., and A. Peach, “Substrate preparation through direct flame,” in 1985 TAPPI Polymers, Laminations and Coatings Conference Proceedings, TAPPI Press, Aug 1985.

1393. Glover, J.H., “Slip migration in extrusion coatings of LDPE,” in 1987 Polymers, Laminations and Coatings Conference Proceedings, 231, TAPPI Press, Aug 1987.

1394. Markgraf, D.A., “Corona treatment: an overview,” in 1986 Coextrusion Conference Proceedings, 85, TAPPI Press, 1986.

1395. Marra, J.V., “Surface modification of polypropylene film,” in 1985 Polymers, Laminations and Coatings Conference Proceedings, 103, TAPPI Press, Aug 1985.

1396. Schwab, F.C., et al, “Effect of resin additives on corona treatment of polyethylene,” in 1985 Polymers, Laminations and Coatings Conference Proceedings, 95, TAPPI Press, Aug 1985 (also in J. Plastic Film and Sheeting, V. 2, p. 119+. 1986).

1398. Whiteside, D.L., “Corona treating of substrates,” in 1985 Polymers, Laminations and Coatings Conference Proceedings, 89, TAPPI Press, Aug 1985.

1399. Markgraf, D.A., “Evolution of corona treating electrodes,” in 1983 Paper Synthetics Conference Proceedings, 255, TAPPI Press, 1983.

1400. Collins, W.M., “Recent technological advances in corona treating,” in 1981 Paper Synthetics Conference Proceedings, 129, TAPPI Press, 1981.

1401. Zito, W.F., “Electrostatic treatment of films: Watts the answer?,” in 1980 Paper Synthetics Conference Proceedings, 181, TAPPI Press, 1980.

1402. Maynard, P.W., “Electrostatic treating to promote adhesion...,” in 1976 Paper Synthetics Conference Proceedings, 59, TAPPI Press, 1976.

1403. Sherman, P.B., “Quartz, ceramic or rubber dielectric in corona treatment,” in 1985 Polymers, Laminations and Coatings Conference Proceedings, 341, TAPPI Press, Aug 1985.

1404. Sherman, P.B., “Corona treat - mechanical not electrical problem,” in 1985 Film Extrusion Conference Proceedings, 45, TAPPI Press, 1985.

1405. Markgraf, D.A., “Physical and surface chemistry of corona discharge...,” in 1985 Polymers, Laminations and Coatings Conference Proceedings, 107+, TAPPI Press, Aug 1985.

1406. Markgraf, D.A., “Practical aspects of determining level of corona treatment,” in 1984 Polymers, Laminations and Coatings Conference Proceedings, 507+, TAPPI Press, Aug 1984 (also in 1985 Film Extrusion Conference Proceedings, p. 65+, TAPPI Press, 1985).

1407. Schuelke, G.W., “Modern trends in corona treating,” in 1984 Polymers, Laminations and Coatings Conference Proceedings, 249+, TAPPI Press, Aug 1984.

1543. Spell, H.L., et al, “Surface analysis of corona treated PE...,” in TAPPI 1978 Conference Proceedings, 283+, TAPPI Press, 1978.

1544. Ristey, W.J., et al, “Degradation and surface oxidation of PE...,” in TAPPI 1978 Conference Proceedings, 267+, TAPPI Press, 1978.

1545. Tietje, A., “Corona treating systems for coater-laminators,” in TAPPI 1978 Conference Proceedings, 173+, TAPPI Press, 1978.

1648. Laiho, E., and T. Ylanen, “Flame, corona, ozone - do we need all pretreatments in extrusion coating?,” in 1997 Polymers, Laminations and Coatings Conference Proceedings, TAPPI Press, Aug 1997.

1661. Tuominen, M., and J. Kuusipalo, “The effects of flame treatment on clay coated paperboard in extrusion coating,” in 2005 European PLACE Conference Proceedings, TAPPI Press, 2005.

1667. Eckert, W., “Improvement of adhesion on polymer film, foil and paperboard by flame treatment,” in 2003 European PLACE Conference Proceedings, TAPPI Press, 2003.

1738. Maxwell, J.W., et al, “The effect of time and contact on corona treated surfaces,” in 1987 Extrusion Coating Short Course/Seminar, 153-158, TAPPI Press, 1987.

1810. Nickerson, R., “Plasma surface modification for cleaning and adhesion,” in 1998 Polymers, Laminations and Coatings Conference Proceedings, TAPPI Press, Sep 1998.

1984. Richards, S., “The effects of surface treatment on heat seal and hot tack,” Presented at TAPPI International Flexible Packaging & Extrusion Division Conference, Apr 2018.

2040. Mancinelli, S., “Flame treatment technology for converting industry,” in 2014 PLACE Conference Proceedings, TAPPI Press, May 2014.

2066. Tuominen, M., J. Lahti, and J. Kuusipalo, “Atmospheric plasma treatment equipment and its utilisation in paper converting,” in 2008 Advanced Coating Fundamentals Symposium Proceedings, TAPPI Press, 2008.

2207. Wolf, R.A., “Effect of the electrical conductivities of corona discharge ground rolls on surface treatment,” in 2016 PLACE Conference Proceedings, TAPPI Press, 2016.

2208. Weber. R., “Corona experiences on paper and cardboard,” in 11th European PLACE Conference Proceedings, TAPPI Press, May 2007.

2209. Vangeneugden, D., “Cold atmospheric plasma technology for surface pretreatment and coating,” in 11th European PLACE Conference Proceedings, 0, TAPPI Press, May 2007.

2210. Lahti, J., and M. Tuominen, “The effects of corona and flame treatment I: PE-LD coated packaging board,” in 11th European PLACE Conference Proceedings, TAPPI Press, May 2007.

2212. Nolan, M.D., S. Greig, and N. Jadon, “Corona, ozone and flame treaters for extrusion coating lines,” in 2001 Polymers, Laminations and Coatings Conference Proceedings, TAPPI Press, Sep 2001.

2214. Wolf, R.A., “Substrate secrets: New printing adhesion improvements using Atmospheric Plasma Glow Discharge technology,” in 2005 PLACE Conference Proceedings, 667-670, TAPPI Press, Sep 2005.

2566. Cushing, G., “Balancing adhesion and slip properties in aqueous heat seal coatings,” in 2008 PLACE Conference Proceedings, 53-60, TAPPI Press, Sep 2008.

2567. Mandolini, P., “Polarized flame treatment for BOPP and CPP films and comparison with other treatment methods,” in 2008 PLACE Conference Proceedings, 710-714, TAPPI Press, Sep 2008.

2568. Lahti, J., M. Tuominen, and J. Kuusipalo, “The influence of atmospheric plasma treatment on digital print quality of extrusion coated paper,” in 2008 PLACE Conference Proceedings, 767-778, TAPPI Press, Sep 2008.

2569. Bodine, J., “Over-treatment of PET - fact or fiction (part 1): A study of the following variables: watt density, corona dwell time, film selection, dyne level and water soak bond strength,” in 2008 PLACE Conference Proceedings, 794-801, TAPPI Press, Sep 2008.

2570. Wolf, R.A., “Advances in adhesion with CO2-based atmospheric pressure plasma surface modification,” in 2008 PLACE Conference Proceedings, 834-838, TAPPI Press, Sep 2008.

<-- Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | Next-->