ACCU DYNE TEST ™ Bibliography
Provided as an information service by Diversified Enterprises.
showing result page 61 of 76, ordered by
1662. Melamies, I.A., “A brilliant finish: A new atmospheric plasma pretreatment technology can improve the finish quality on plastics, metal and glass,” Finishing Today, (Mar 2007).
2871. Rong, X., and M. Keif, “A study of PLA printability with flexography,” Presented at 59th Annual Technical Association of Graphic Arts Technical Conference Proceedings, Mar 2007.
3018. Tavana, H., and A.W. Neumann, “Recent progress in the determination of solid surface tensions from contact angles,” Advances in Colloid and Interface Science, 132, 1-32, (Mar 2007).
1556. Sabreen, S.R., “Technology developments for digital applications,” Plastics Decorating, 20-25, (Apr 2007).
1562. Gao, L., and T.J. McCarthy, “Ionic liquids for surface analysis,” PMSE Preprints, 97, 534-535, (Apr 2007).
1590. Bishop, C.A., “Problems relating to surface energy,” http://www.vacuumcoatingblog.co.uk, Apr 2007.
1923. Bousquet, A., G. Pannier, E. Ibarboure, E. Papon, and J. Rodriguez-Hernandez, “Control of the surface properties of polymer blends,” J. Adhesion, 83, 335-349, (Apr 2007).
We report on the preparation of amphiphilic diblock copolymers containing a hydrophilic segment, poly(acrylic acid)(PAA), and a polystyrene hydrophobic part. We analysed, by means of contact-angle measurements, how the hydrophilic segments usually bury themselves under the hydrophobic when exposed to air to reduce the surface free energy of the system. In contrast, in contact with water, the hydrophilic blocks have a tendency to segregate to the interface. We first describe the parameters that control the surface reconstruction when the environmental conditions are inversed from dry air to water vapour. Then, annealing time, temperature, composition and size of the diblock copolymers, and size of the matrix that influenced the surface migration process are the main parameters also considered. Finally, the density of the carboxylic functions placed at the surface was determined using the methylene blue method.
2135. no author cited, “Corona: An evolving process,” Converting Today, 19, (Apr 2007).
1555. no author cited, “Atmospheric plasma treats thick sheet,” Plastics Technology, 53, 15, (May 2007).
1557. Wolf, R.A., “Advances in adhesion with CO2-based atmospheric plasma surface modification,” in ANTEC 2007, Society of Plastics Engineers, May 2007.
1558. DiGiacomo, J.D., “Adhesion promotion using flame plasma surface treatment,” in ANTEC 2007, Society of Plastics Engineers, May 2007.
1559. Grace, J., H.K. Zhuang, and L. Gerenser, “Importance of process conditions in polymer surface modification: a critical assessment,” in Polymer Surface Modification: Relevance to Adhesion, Vol. 4, Mittal, K.L., ed., 3-24, VSP, May 2007.
1560. Lommatzsch, U., M. Noeske, J. Degenhart, T. Wubben, S. Strudthoff, et al, “Pretreatment and surface modification of polymers via atmospheric-pressure plasma jet treatment,” in Polymer Surface Modification: Relevance to Adhesion, Vol. 4, Mittal, K.L., ed., 25-32, VSP, May 2007.
1561. Kobayashi, T., and H. Kumagai, “Surface modification of polymers by ozone: Comparison of polyethylene and polystyrene treated at different temperatures,” in Polymer Surface Modification: Relevance to Adhesion, Vol. 4, Mittal, K.L., ed., 113-125, VSP, May 2007.
2208. Weber. R., “Corona experiences on paper and cardboard,” in 11th European PLACE Conference Proceedings, TAPPI Press, May 2007.
2209. Vangeneugden, D., “Cold atmospheric plasma technology for surface pretreatment and coating,” in 11th European PLACE Conference Proceedings, 0, TAPPI Press, May 2007.
2210. Lahti, J., and M. Tuominen, “The effects of corona and flame treatment I: PE-LD coated packaging board,” in 11th European PLACE Conference Proceedings, TAPPI Press, May 2007.
2536. De Geyter, N., R. Morent, C. Lays, L. Gengembre, and E. Payen, “Treatment of polymer films with a dielectric barrier discharge in air, helium and argon at medium pressure,” Surface and Coatings Technology, 201, 7066-7075, (May 2007).
In this paper, polyester (PET) and polypropylene (PP) films are modified by a dielectric barrier discharge in air, helium and argon at medium pressure (5.0 kPa). The plasma-modified surfaces are characterized by contact angle measurements and X-ray photoelectron spectroscopy (XPS) as a function of energy density. The polymer films, modified in air, helium and argon, show a remarkable increase in hydrophilicity due to the implantation of oxygen-containing groups, such as C–O, O–CO and C
O. Atomic oxygen, OH radicals, UV photons and ions, present in the discharge, create radicals at the polymer surfaces, which are able to react with oxygen species, resulting in the formation of oxygen-containing functionalities on the polymer surfaces. It is shown that an air plasma is more efficient in implanting oxygen functionalities than an argon plasma, which is more efficient than a helium plasma. In an air plasma, most of the created radicals at the polymer surface will quickly react with an oxygen particle, resulting in an efficient implantation of oxygen functionalities. However, in an argon and helium plasma, the created radicals can react with an oxygen particle, but can also recombine with each other resulting in the formation of an oxidized cross-linked structure. This cross-linking process will inhibit the implantation of oxygen, resulting in a lower efficiency. In argon plasma, more ions are present to create radicals, therefore, more radicals are able to react with oxygen species. This can explain the higher efficiency of an argon plasma compared to a helium plasma.
2984. Morent, R., N. De Geyter, C. Leys, L. Gengembre, and E. Payen, “Study of the ageing behaviour of polymer films treated with a dielectric barrier discharge in air, helium and argon at medium pressure,” Surface and Coatings Technology, 201, 7847-7854, (Jun 2007).
1519. Bishop, C.A., “Good adhesion required for BOPP,” http://www.vacuumcoatingblog.co.uk, Jul 2007.
1568. Hansen, C.M., Hansen Solubility Parameters: A User's Handbook, 2nd Ed., CRC Press, Jul 2007.
1575. Bishop, C.A., “Problem of ink adhesion,” http://www.vacuumcoatingblog.co.uk, Jul 2007.
1665. Knospe, A., “Pre-treatment of aluminum with plasma in air,” Aluminum International Today, 19, (Jul 2007).
1705. Bishop, C.A., “Good adhesion required for BOPP: The main characteristics that a BOPP film must have to present good UV ink adhesion or good lamination forces with UV adhesives,” http://www.vacuumcoatingblog.com, Jul 2007.
2055. Kim, J.H., D.S. Shin, M.H. Han, O.W. Kwon, H.K. Lee, et al, “Surface free energy analysis of poly(vinyl alcohol) films having various molecular parameters,” J. Applied Polymer Science, 105, 424-428, (Jul 2007).
The molecular parameters of poly(vinyl alcohol) have enormous effects on its physical and chemical properties. Therefore, the surface characteristics of poly(vinyl alcohol) films are also determined by the molecular parameters. In this study, the dependence of the surface free energy on the molecular weight, degree of saponification, and stereoregularity of poly(vinyl alcohol) films has been evaluated with contact-angle measurements. The surface free energy of poly(vinyl alcohol) films increases with decreases in the syndiotactic dyad content, molecular weight, and degree of saponification. The polar component of the surface energy is not affected by the deviation of the molecular weight and degree of saponification very much. However, it decreases with increases in the syndiotactic dyad content and ranges from 11.64 to 4.35 dyn/cm.
© 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007 https://onlinelibrary.wiley.com/doi/abs/10.1002/app.26010
2198. Boyle, E., “Treat 'em right,” Paper Film & Foil Converter, 81, 0, (Jul 2007).
1566. Williams, K., and B. Bauman, “New technology for enhancing wood-plastic composites,” JCT CoatingsTech, 4, 52-57, (Aug 2007).
1567. Fontelera, J., “Proper treatment prompts profits,” Converting, 25, 28-32, (Aug 2007).
1591. Finstad, C., J. Madocks, P. Morse, and P. Marcus, “Surface treatment of plastic substrates for improved adhesion of thin metal films through ion bombardment by an anode layer ion source,” in Adhesion Aspects of Thin Films, Vol. 3, Mittal, K.L., ed., 221-233, VSP, Sep 2007.
1592. Zekonyte, J., V. Zaporojtchenko, and F. Faupel, “Tailoring of thermoplastic polymer surfaces with low energy ions: Relevance to growth and adhesion of Cu,” in Adhesion Aspects of Thin Films, Vol. 3, Mittal, K.L., ed., 235-262, VSP, Sep 2007.
1624. Wolf, R.A., “Response to question on modes of measuring or characterizing plasma treatment efficiency on Kapton,” http://www.webcoatingblog.com, Sep 2007.
1706. Bishop, C.A., “Relationship between extractables and delamination,” http://www.vacuumcoatingblog.com, Sep 2007.
2748. Culbertson, E., “Metal adhesion to PET film,” in 2007 PLACE Conference Proceedings, 243-246, TAPPI Press, Sep 2007.
2749. Wolf, R.A., and A.C. Sparavigna, “Modifying surface features: Extrusion coating and laminating,” in 2007 PLACE Conference Proceedings, 881-884, TAPPI Press, Sep 2007.
2750. Wolf, R.A., “Clear barrier at atmospheric pressure - the second phase,” in 2007 PLACE Conference Proceedings, 1271-1276, TAPPI Press, Sep 2007.
838. Zenkiewicz, M., “Analysis of the most important methods of investigations of polymeric materials surface free energy,” Polimery, 52, 760-767, (Oct 2007).
In the article the analysis of the main methods of calculations of interfacial free energy and surface free energy (SEP) values of solids, in which contact angle measurements' results play a key role, has been presented. The importance of Young's equation and Berthelot's hypothesis as the scientific basis of these methods has been indicated. Various methods of calculations of interfacial free energy values for solid-liquid systems, including calculations of this energy on the basis of state equations or SEP divide to independent components, (especially for polymers) were discussed. The most important methods of calculations of SEP values for polymeric materials on this basis were characterized. The methods of calculations of contact angle values for porous materials, granulated products, powders or fibers on the basis of Washburn equation, what is a base for calculations of SEP of these materials, were presented.
1593. Miller, C.A., and P. Neogi, “Fundamentals of wetting, contact angle, and adsorption,” in Interfacial Phenomena: Equilibrium and Dynamic Effects, 2nd Ed., 61-107, CRC Press, Oct 2007.
1609. Tolinski, M., “Energetic surface treatments: advanced methods increase surface energy and properties,” Plastics Engineering, 63, 46-47, (Oct 2007).
1613. Nilsson, A., L.G.M. Pettersson, and J.K. Norskov, eds., Chemical Bonding at Surfaces and Interfaces, Elsevier, Oct 2007.
1619. Wolf, R.A., “Response to question on corona treatment of metallized CPP film,” http://www.webcoatingblog.com, Oct 2007.
<-- Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | Next-->