ACCU DYNE TEST ™ Bibliography

Provided as an information service by Diversified Enterprises.

1265. O'Hare, L.-A., S. Leadley, and B. Parbhoo, “Surface physicochemistry of corona-discharge-treated polypropylene film,” Surface and Interface Analysis, 33, 335-342, (Apr 2002).

1367. Cui, N.Y., and N.M.D. Brown, “Modification of the surface properties of a polypropylene (PP) film using an air dielectric barrier discharge plasma,” Applied Surface Science, 189, 31-38, (Apr 2002).

1578. Palmers, J., “Economic alternative to primers,” European Plastic Product Manufacturer, 51, (Apr 2002).

2076. Kim, K.S., K.H. Lee, K. Cho, and C.E. Park, “Surface modification of polysulfone ultrafiltration membrane by oxygen plasma treatment,” J. Membrane Science, 199, 135-145, (Apr 2002).

2546. Kurdi, J., H. Ardelean, P. Marcus, P. Jonnard, and F. Arefi-Khonsari, “Adhesion properties of aluminum-metallized/ammonia plasma-treated polypropylene: Spectroscopic analysis (XPS, EXES) of the aluminum/polypropylene interface,” Applied Surface Science, 189, 119-128, (Apr 2002).

1928. Weiss, C., and H. Muenstedt, “Surface modification of polyether ether ketone (PEEK) films for flexible printed circuit boards,” J. Adhesion, 78, 443-445, (May 2002).

2100. Severini, F., L. Di Landro, L. Galfetti, L. Meda, G. Ricca, and G. Zenere, “Flame surface modification of polyethylene sheets,” Macromolecular Symposia, 181, 225-244, (May 2002).

617. Markgraf, D.A., “Troubleshooting corona treatment equipment in the converting industry,” in 2002 Troubleshooting Short Course for Extrusion Coating & Flexible Packaging Notes, 109-118, TAPPI Press, Jun 2002 (also in 2002 PLACE Conference Proceedings, TAPPI Press, Sep 2002).

618. DiGiacomo, J.D., “Fundamentals of flame plasma surface treating & troubleshooting dryer systems,” in 2002 Troubleshooting Short Course for Extrusion Coating & Flexible Packaging Notes, 119-149, TAPPI Press, Jun 2002.

886. Brewis, D.M., and I. Mathieson, Adhesion and Bonding to Polyolefins (Rapra Review Report 143), Rapra, Jun 2002.

1202. Chen, J., and J.H. Davidson, “Electron density and energy distributions in the positive DC corona: Interpretation for corona-enhanced chemical reactions,” Plasma Chemistry and Plasma Processing, 22, 199-224, (Jun 2002).

2290. Della Volpe, C., D. Maniglio, M. Morra, and S. Siboni, “The determination of a 'stable-equilibrium' contact angle on heterogeneous and rough surfaces,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 206, 47-67, (Jul 2002).

369. Utschig, S., “Why is corona treating necessary in the flexo process?,” Converting, 20, 28, (Aug 2002).

2410. Hammen, R.R., and D.V. Rundberg, “Multi-mode treater with internal air cooling system,” U.S. Patent 6429595, Aug 2002.

671. Mittal, K.L., ed., Contact Angle, Wettability and Adhesion, Vol. 2, VSP, Sep 2002.

672. Della Volpe, C., D. Maniglio, and S. Siboni, “The evaluation of surface free energy of polymers: The role of water acid-base properties and the measurement of an "equilibrium" contact angle,” in Contact Angle, Wettability and Adhesion, Vol. 2, Mittal, K.L., ed., 45-71, VSP, Sep 2002.

673. Nam, S., and A.N. Netravali, “Tetralin and ammonia plasma treatment of ultra-high-strength polyethyelene fibers for improved adhesion to epoxy resin,” in Contact Angle, Wettability and Adhesion, Vol. 2, Mittal, K.L., ed., 147-162, VSP, Sep 2002.

674. Tyomkin, I., “Determination of contact angles in different size pores in a porous material,” in Contact Angle, Wettability and Adhesion, Vol. 2, Mittal, K.L., ed., 165-176, VSP, Sep 2002.

675. Chibowski, E., “Contact angle hysteresis due to a film present behind the drop,” in Contact Angle, Wettability and Adhesion, Vol. 2, Mittal, K.L., ed., 265-288, VSP, Sep 2002.

676. Extrand, C.W., “Water contact angles and hysteresis on polyamides,” in Contact Angle, Wettability and Adhesion, Vol. 2, Mittal, K.L., ed., 289-297, VSP, Sep 2002.

677. Luner, P.E., and E. Oh, “Surface free energies of cellulose ether films,” in Contact Angle, Wettability and Adhesion, Vol. 2, Mittal, K.L., ed., 299-315, VSP, Sep 2002.

678. Springael, S., and F. de Buyl, “Uncured silicone sealant surface energy as determined by contact angle measurements: A new quantitative tool for the assessment of sealant ease of use,” in Contact Angle, Wettability and Adhesion, Vol. 2, Mittal, K.L., ed., 317-330, VSP, Sep 2002.

679. Ponter, A.B., K.R. Jinna, M. Asapu, and W.R. Jones Jr., “Surface energy and surface roughness changes produced by irradiating polymers with ultraviolet-ozone,” in Contact Angle, Wettability and Adhesion, Vol. 2, Mittal, K.L., ed., 331-344, VSP, Sep 2002.

680. Petri, D.F.S., E.M.A. Pereira, and A.M. Carmona-Ribiero, “Wettability and adhesion of bilayer-forming lipids onto polymeric films,” in Contact Angle, Wettability and Adhesion, Vol. 2, Mittal, K.L., ed., 535-548, VSP, Sep 2002.

681. Kawano, S., et al, “Water base adhesion promoter for polypropylene and method for coating to polypropylene materials using the promoter,” U.S. Patent 6447844, Sep 2002.

693. Murray, L., and P. McCarry, “Effect of test conditions and PET surface treatment on moisture barrier of multilayer metallized film structures,” in 2002 PLACE Conference Proceedings, TAPPI Press, Sep 2002.

694. Schubert, G., “Adhesion of coatings to aluminum foil - a sticky issue,” in 2002 PLACE Conference Proceedings, TAPPI Press, Sep 2002.

695. Hill, M., “Flame treatment meets quality management,” in 2002 PLACE Conference Proceedings, TAPPI Press, Sep 2002.

696. Wolf, R.A., “Atmospheric plasma: The new functional treatment for nonwovens,” in 2002 PLACE Conference Proceedings, TAPPI Press, Sep 2002.

745. Birdi, K.S., “Surface tension and interfacial tension of liquids,” in Handbook of Surface and Colloid Chemistry, 2nd Ed., Birdi, K.S., ed., 67-118, CRC Press, Sep 2002.

746. Hansen, C.M., “Cohesion energy parameters applied to surface phenomena,” in Handbook of Surface and Colloid Chemistry, 2nd Ed., Birdi, K.S., ed., 539-554, CRC Press, Sep 2002.

1193. Akishev, Y.S., M.E. Grushin, A. Napartovich, and N.I. Trushkin, “Novel AC and DC non-thermal plasma sources for cold surface treatment of polymer films and fabrics at atmospheric pressure,” Plasmas and Polymers, 7, 261-289, (Sep 2002).

1546. no author cited, “Wetting tension,” ExxonMobil Chemical Films Europe, Sep 2002.

2073. Kaminska, A., H. Kaczmarek, and J. Kowalonek, “The influence of side groups and polarity of polymers on the kind and effectiveness of their surface modification by air plasma action,” European Polymer J., 38, 1915-1919, (Sep 2002).

2517. Inagaki, N., S. Tasaka, K. Narushima, and H. Kobayashi, “Surface modification of PET films by pulsed argon plasma,” J. Applied Polymer Science, 85, 2845-2852, (Sep 2002).

622. Lukowsky, D., and G. Hora, “Pretreatments of wood to enhance the performance of outdoor coatings,” in Quo Vadis - Coatings?: XXVI FATIPEC Congress, Adler, H.-J.P., and K. Potje-Kamloth, eds., 77-86, Wiley-VCH, Oct 2002.

889. Koh, S.K., J.S. Cho, S. Han, K.H. Kim, and Y.W. Beag, “Surface modifications by ion-assisted reactions,” in Metallization of Polymers 2, Sacher, E., ed., 165-190, Plenum Publishers, Oct 2002.

890. Romand, M., M. Charbonnier, and Y. Goepfert, “Plasma and VUV pretreatments of polymer surfaces for adhesion enhancement of electrolessly deposited Ni or Cu films,” in Metallization of Polymers 2, Sacher, E., ed., 191-206, Plenum Publishers, Oct 2002.

894. Genuario, L., “Corona treatment,” Label & Narrow Web Industry, 7, 58-64, (Oct 2002).

897. Kendall, K., “Energy analysis of adhesion,” in Adhesion Science and Engineering: Vol. 1 - The Mechanics of Adhesion; Vol. 2 - Surfaces, Chemistry and Applications, Dillard, D.A., and A.V. Pocius, eds., 77-110(V1), Elsevier, Oct 2002.

<-- Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | Next-->