ACCU DYNE TEST ™ Bibliography

Provided as an information service by Diversified Enterprises.

1201. Chattopadhyay, S., R.N. Ghosh, T.K. Chaki, and A.K. Bhowmick, “Surface analysis and printability studies on electron beam-irradiated thermoplastic elastomeric films from LDPE and EVA blends,” J. Adhesion Science and Technology, 15, 303-320, (2001).

1222. Kim, B.K., K.S. Kim, K. Cho, and C.E. Park, “Retardaton of the surface rearrangement of O2 plasma-treated LDPE by a two-step temperature control,” J. Adhesion Science and Technology, 15, 1805-1816, (2001).

1230. Lei, J., X. Liao, and J. Gao, “Surface structure of low density polyethylene films grafted with acrylic acid using corona discharge,” J. Adhesion Science and Technology, 15, 993-999, (2001).

1243. Page, S.A., J.C. Berg, and J.-A.E. Manson, “Characterization of epoxy resin surface energies,” J. Adhesion Science and Technology, 15, 153-170, (2001).

1262. Zenkiewicz, M., “Wettability and surface free energy of corona-treated biaxially-oriented polypropylene film,” J. Adhesion Science and Technology, 15, 1769-1785, (2001).

1263. Zenkiewicz, M., “Investigation on the oxidation of surface layers of polyolefins treated with corona discharge,” J. Adhesion Science and Technology, 15, 63-70, (2001).

1356. Abdel-Salam, M., H. Singer, and A. Ahmed, “Effect of the dielectric barrier on discharges in non-uniform electric fields,” J. Physics D: Applied Physics, 34, 1219-1234, (2001).

1437. Kunz. M., and M. Bauer, “Adhesion to plastic,” Farbe und Lack, 107, 54-62, (2001).

1588. Kersten, H., H. Deutsch, H. Steffan, G.M.W. Kroesen, and R. Hippler, “The energy balance at substrate surfaces during plasma processing,” Vacuum, 63, 385-431, (2001).

1687. Massines, F., G. Gouda, N. Gherardi, M. Duran, and E. Croquesel, “The role of dielectric barrier discharge atmosphere and physics on polypropylene surface treatment,” Plasmas and Polymers, 6, 35-49, (2001).

1694. Clint, J.H., “Adhesion and components of solid surface energies,” J. Current Opinions on Colloid and Interface Science, 6, 28-33, (2001).

1727. Novak, I., and I. Chodak, “Effect of polypropylene UV modification on adhesion to polar polymers,” Petroleum and Coal, 43, 27-28, (2001).

1728. Novak, I., and S. Florian, “Effect of short-time aging on hydrophilicity of discharge plasma pretreated biaxially oriented polypropylene,” Petroleum and Coal, 43, 29-30, (2001).

2101. Schroder, K., A. Meyer-Plath, D. Keller, W. Besch, G. Babucke, and A. Ohi, “Plasma-induced surface functionalization of polymeric biomaterials in ammonia plasma,” Contributions to Plasma Physics, 41, 562-572, (2001).

2572. Mikula, M., and M. Cernak, “More effective corona for prepress treatment of polymeric foils,” in Proceedings of the 4th Seminar on Graphic Arts Technology, 82-88, Pardubice, Czech Republic, 2001.

2765. Roth, J.R., D.M. Sherman, F. Karakaya, P.P.Y. Tsai, K. Kelly-Wintenberg, and T.C. Montie, “Increasing the surface energy and sterilization of nonwoven fabrics by exposure to a one atmosphere uniform glow discharge plasma (OAUGDP),” International Nonwovens J., 10, 34-47, (2001).

239. Millward, J., “A trick to treat?,” Package Printing, 48, 40-45, (Jan 2001).

878. Schramm, L.L., Dictionary of Colloid and Interface Science, Wiley-Interscience, Jan 2001.

962. Novak, I., and S. Florian, “Influence of ageing on adhesive properties of polypropylene modified by discharge plasma,” Polymer Intl., 50, 49-52, (Jan 2001).

1554. Sesetyan, T., “Testing equipment,” Label & Narrow Web, 6, 36-43, (Jan 2001).

2054. Woods, S.S., and A.V. Pocius, “The influence of polymer processing additives (PPAS) on the surface and optical properties of polyolefin plastomer blown film,” J. Plastic Film and Sheeting, 17, 62-87, (Jan 2001).

2518. Inagaki, N., S. Tasaka, and S. Shimada, “Comparative studies on surface modification of poly(ethylene terephthalate) by remote and direct argon plasmas,” J. Applied Polymer Science, 79, 808-815, (Jan 2001).

623. De Coninck, J., “Is there an optimal substrate geometry for wetting (at the microscopic scale)?,” in Interfacial Properties on the Submicrometer Scale (ACS Symposium Series 781), Frommer, J., and R.M. Overney, eds., 24-35, American Chemical Society, Feb 2001.

1276. Jana, T., B.C. Roy, R. Ghosh, and S. Maiti, “Biodegradable film, IV. Printability study on biodegradable film,” J. Applied Polymer Science, 79, 1273-1277, (Feb 2001).

1280. Ogawa, T., H. Mukai, and S. Osawa, “Improvement of the mechanical properties of an ultrahigh molecular weight polyethylene fiber/epoxy composite by corona-discharge treatment,” J. Applied Polymer Science, 79, 1162-1168, (Feb 2001).

1439. Kaplan, S.L., and D.J. Naab, “PSAs tenaciously bond to non-stick film after plasma treatment,” Adhesives and Sealants Industry, 8, 40-42, (Feb 2001).

2407. Miranda, R., “Double corona treatment,” U.S. Patent 6190741, Feb 2001.

249. Mount, E.M. III, “Plasma pretreatment for metalizing packaging film,” Converting, 19, 124-131, (Mar 2001).

2481. Shieh, S., “An analysis of contact angle measurement,” AST Products, Mar 2001.

547. Podhajny, R.M., “Water-based ink adhesion and web temperature,” Paper Film & Foil Converter, 75, 26, (Apr 2001).

895. Holman, S., “What's your problem?,” Australian Flexo, (Apr 2001).

1170. Brynolf, R., “Method and apparatus for treating substrate plastic parts to accept paint without using adhesion promoters,” U.S. Patent 6582773, Apr 2001.

1245. Park, S.-J., and J.-S. Jin, “Effect of corona discharge treatment on the dyeability of low-density polyethylene film,” J. Colloid and Interface Science, 236, 155-160, (Apr 2001).

2839. Yildirim, I., “Surface Free Energy Characterization of Powders, Chapter 2: Determination of surface free energies of talc from contact angles measured on flat and powdered surfaces (PhD thesis),” Virginia Tech, Apr 2001.

882. Petrie, S.P., and E.F. Bardsley, “Epoxy adhesives: Effect of plasma treatment and surface roughness on epoxy to polyethylene bond strength,” in ANTEC 2001 Conference Proceedings, 1175-1178, Society of Plastics Engineers, May 2001.

960. Jingxin, L., H. Guangjian, L. Qiman, and L. Xiaohong, “Surface structure and adhesive properties of biaxially oriented polypropylene film grafted with poly(acrylic amide) using corona discharge,” Polymer Engineering and Science, 41, 782-785, (May 2001).

1112. DiGiacomo, J.D., “Fundamentals of flame plasma surface treating,” in 8th European Polymers, Films, Laminations and Extrusion Coatings Conference, TAPPI Press, May 2001.

1114. Greig, S., and N. Jadon, “Corona, ozone and flame treaters for extrusion coating lines,” in 8th European Polymers, Films, Laminations and Extrusion Coatings Conference, TAPPI Press, May 2001.

1934. Charbonnier, M., M. Romand, H. Esrom, and R Seebock, “Functionalization of polymer surfaces using excimer VUV systems and silent discharges: Application to electroless metallization,” J. Adhesion, 75, 381-404, (May 2001).

2081. Lawrence, J., and L. Li, “Modification of the wettability characteristics of polymethyl methacrylate (PMMA) by means of CO2, Nd:YAG, excimer and high power diode laser radiation,” Materials Science and Engineering A, 303, 142-149, (May 2001).

<-- Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | Next-->