ACCU DYNE TEST ™ Bibliography

Provided as an information service by Diversified Enterprises.

1074. Tavakoli, S.M., and S.T. Riches, “Laser surface modification of polymers to enhance adhesion, I: Polyolefins,” in Antec '96 Vol. 1, 1219-1224, Society of Plastics Engineers, May 1996.

1366. Comyn, J., L. Mascia, G. Xiao, and B.M. Parker, “Plasma-treatment of polyetheretherketone (PEEK) for adhesive bonding,” Intl. J. Adhesion and Adhesives, 16, 97-104, (May 1996).

1467. Chan, C.-M., T.-M. Ko, and H. Hiraoka, “Polymer surface modification by plasmas and photons,” Surface Science Reports, 24, 1-54, (May 1996).

2049. Drummond, C.J., G. Georgaklis, and D.Y.C. Chen, “Fluorocarbons: Surface free energies and van der Waals interaction (letter),” Langmuir, 12, 2617-2621, (May 1996).

717. Neumann, A.W., and J.K. Spelt, eds., Applied Surface Thermodynamics, Marcel Dekker, Jun 1996.

718. Li, D., and A.W. Neumann, “Thermodynamic status of contact angles,” in Applied Surface Thermodynamics, Neumann, A.W., and J.K. Spelt, eds., 109-168, Marcel Dekker, Jun 1996.

719. Spelt, J.K., and D. Li, “The equation of state approach to interfacial tensions,” in Applied Surface Thermodynamics, Neumann, A.W., and J.K. Spelt, eds., 239-292, Marcel Dekker, Jun 1996.

720. Spelt, J.K., E. Moy, D.Y. Kwok, and A.W. Neumann, “The theory of surface tension components and the equation of state approach,” in Applied Surface Thermodynamics, Neumann, A.W., and J.K. Spelt, eds., 293-332, Marcel Dekker, Jun 1996.

721. Moy, E., and A.W. Neumann, “Theoretical approaches for estimating solid-liquid interfacial tensions,” in Applied Surface Thermodynamics, Neumann, A.W., and J.K. Spelt, eds., 333-378, Marcel Dekker, Jun 1996.

722. Spelt, J.K., and E.I. Vargha-Butler, “Contact angle and liquid surface tension measurements: general procedures and techniques,” in Applied Surface Thermodynamics, Neumann, A.W., and J.K. Spelt, eds., 379-412, Marcel Dekker, Jun 1996.

723. Kwok, D.Y., D. Li, and A.W. Neumann, “Capillary rise at a vertical plate as a contact angle technique,” in Applied Surface Thermodynamics, Neumann, A.W., and J.K. Spelt, eds., 413-440, Marcel Dekker, Jun 1996.

724. Lahooti, S., O.I. del Rio, P. Cheng, and A.W. Neumann, “Axisymmetric drop shape analysis (ADSA),” in Applied Surface Thermodynamics, Neumann, A.W., and J.K. Spelt, eds., 441-508, Marcel Dekker, Jun 1996.

725. Li, D., and A.W. Neumann, “Wettability and surface tension of particles,” in Applied Surface Thermodynamics, Neumann, A.W., and J.K. Spelt, eds., 509-556, Marcel Dekker, Jun 1996.

989. Strobel, M., M.C. Branch, M. Ulsh, R.S. Kapuan, S. Kirk, and C.S. Lyons, “Flame surface modification of polypropylene film,” J. Adhesion Science and Technology, 10, 515-539, (Jun 1996).

988. Miller, J.D., S. Veeramasuneni, J. Drelich, M.R. Yalamanchili, and G. Yamauchi, “Effect of roughness as determined by atomic force microscopy on the wetting properties of PTFE thin films,” Polymer Engineering and Science, 36, 1849-1855, (Jul 1996).

2396. Grace, J.M., J. Chen, L.J. Gerenser, and D.A. Glocker, “Use of glow discharge treatment to promote adhesion of aqueous coatings to substrate,” U.S. Patent 5538841, Jul 1996.

310. Sarmadi, M., and F. Denes, “Surface modification of polymers under cold plasma conditions,” TAPPI J., 79, 189-204, (Aug 1996).

1943. Nakamura, Y., and K. Nakamae, “Adhesion between plasma-treated polypropylene films and thin aluminum films,” J. Adhesion, 59, 75-86, (Aug 1996).

2148. Coates, D.M., and S.L. Kaplan, “Modification of polymeric material surfaces with plasmas,” http://www.4thstate.com/publications/modofpolyPrint.htm, Aug 1996.

4. Bentley, D.J., “Taking the 'magic' and mystery out of treating,” Paper Film & Foil Converter, 70, 24, (Sep 1996).

84. Dinelli, B., J.C. Jammet, and K. Kuusipalo, “Interactions between melt nature and pretreatments: key to good adhesion,” TAPPI J., 79, 189-193, (Sep 1996).

1195. Belgacem, M.N., A. Blayo, and A. Gandini, “Surface characterization of polysaccharides, lignins, printing ink pigments, and ink fillers by inverse gas chromatography,” J. Colloid and Interface Science, 182, 431-436, (Sep 1996).

1409. Meiners, S., J. Salge, E. Prinz, and F. Forster, “Surface modification of polymer materials by transient gas discharges at atmospheric pressure,” in 5th International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Sep 1996.

5. Bentley, D.J., “How to measure treatment (or, is this trip necessary?),” Paper Film & Foil Converter, 70, 24, (Oct 1996).

36. Boyle, E., “Taking the measure of surface treatment is a learning process,” Paper Film & Foil Converter, 70, 52-54, (Oct 1996).

302. Ray, A., “Is in-line corona treating necessary?,” Flexo, 21, 56-58, (Oct 1996).

986. Kang, E.T., K.L. Tan, K. Kato, Y. Uyama, and Y. Ikada, “Surface modification and functionalisation of polytetrafluoroethylene films,” Macromolecules, 29, 6872-6879, (Oct 1996).

1047. DiGiacomo, J.D., and J. Pezzuto, “Troubleshooting flame plasma surface treating systems-Q&A approach,” in 1996 Polymers, Laminations and Coatings Conference Proceedings, 101-104, TAPPI Press, Oct 1996.

1441. Teltech Resources Network Corp., “Low surface energy substrates present bonding challenges,” Adhesives Age, 39, 38-44, (Oct 1996).

1205. Comyn, J., L. Mascia, X. G., and B.M. Parker, “Corona-discharge treatment of polyetheretherketone (PEEK) for adhesive bonding,” Intl. J. Adhesion and Adhesives, 16, 301-304, (Nov 1996).

2078. Koh, S.-K., W.-K. Choi, J.-S. Cho, S.-K. Song, Y.-M. Kim, and H.-J. Jung, “Ar+ ion irradiation in oxygen environment for improving wettability of polymethylmethacrylate,” J. Materials Research, 11, 2933-2939, (Nov 1996).

2397. Grace, J.M., J. Chen, L.J. Gerenser, and D.A. Glocker, “Use of glow discharge treatment to promote adhesion of aqueous coatings to substrate,” U.S. Patent 5582921, Dec 1996.

453. Dontula, N., C.L. Weitzsacker, and L.T. Drzal, “Surface activation of polymers using ultraviolet light activation,” in ANTEC 97, Society of Plastics Engineers, 1997.

530. Matuana, L.M., J.J. Balatinecz, and C.B. Park, “Evaluation of adhesion between PVC and surface-treated wood veneer laminates,” in ANTEC 97, Society of Plastics Engineers, 1997.

550. Rawls, A.S., et al, “Evaluation of surface concentration of additives in LLDPE films,” in ANTEC 97, Society of Plastics Engineers, 1997.

908. no author cited, “Surface tension of inks and paper; project 2695-26,” Chesapeake Packaging Co., 1997.

974. Saito, D., “Surface modification by corona discharge,” Nippon Gomu Kyokaishi, 70, 333-339, (1997).

981. Choi, D.M., C.K. Park, K. Cho, and C.E. Park, “Adhesion improvement of epoxy resin/PE joints by plasma treatment of PE,” Polymer, 38, 6243-6249, (1997).

982. Nihlstrand, A., T. Hjertberg, and K. Johansson, “Plasma treatment of polyolefins - influence of material composition, 2: Lacquer adhesion and locus of failure,” Polymer, 38, 3591-3599, (1997).

983. Xiao, G.Z., “Effects of solvents on the surface properties of oxygen plasma-treated polyethylene and polypropylene films,” J. Adhesion Science and Technology, 11, 655-663, (1997).

<-- Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | Next-->