ACCU DYNE TEST ™ Bibliography

Provided as an information service by Diversified Enterprises.

593. Wallace, E. Jr., et al, “Contact angle titration and ESCA analysis of polyester surfaces modified by flame and corona treatment,” in ANTEC 95, Society of Plastics Engineers, 1995.

594. Walzak, M.J., et al, “Characterization of PP and PET surfaces after exposure to UV light and/or ozone,” in ANTEC 95, Society of Plastics Engineers, 1995.

606. Yoo, D., et al, “Layer-by-layer modification of surfaces through the use of self-assembled monolayers of polyions,” in ANTEC 95, Society of Plastics Engineers, 1995.

871. Bierwagen, G.P., “Surface energetics,” in Paint and Coating Testing Manual, 14th Ed. of the Gardner-Sward Handbook, Koleske, J.V., ed., 369-382, ASTM, 1995.

872. Hansen, C.M., “Solubility Parameters,” in Paint and Coating Testing Manual, 14th Ed. of the Gardner-Sward Handbook, Koleske, J.V., ed., 383-406, ASTM, 1995.

1006. Kusano, Y., T. Noguchi, M. Yoshikawa, N. Kato, and K. Naito, “Effect of discharge treatment on vulcanised rubber surfaces,” in IRC '95 Kobe International Rubber Conference Proceedings, 432-435, Japan Society of Rubber Industry, 1995.

1076. Brewis, D.M., I. Mathieson, and M. Wolfensburger, “Treatment of low energy surfaces for adhesive bonding,” Intl. J. Adhesion and Adhesives, 15, 87-90, (1995).

1077. Wu, D.Y., W.S. Gutowski, S. Li, and H.J. Griesser, “Ammonia plasma treatment of polyolefins for adhesive bonding with a cyanoacrylate adhesive,” J. Adhesion Science and Technology, 9, 501-525, (1995).

1308. Li, D., and A.W. Neumann, “Wetting,” in Characterization of Organic Thin Films, Ulman, A., ed., 165-192, Manning Publications, 1995.

1309. Callen, B.W., M.L. Ridge, S. Lahooti, A.W. Neumann, and R.N.S. Sodhi, “Remote plasma and UV-ozone modification of polystyrene,” J. Vacuum Science and Technology, A13, 2023-2029, (1995).

1695. Al-Turaif, H., W.N. Unertl, and P. LePoutre, “Effect of pigmentation on the surface energy and surface chemistry of paper coating binders,” J. Adhesion Science and Technology, 9, 801-811, (1995).

1787. Chapman, T.M., et al, “Determination of low critical surface tensions of novel fluorinated poly(amide urethane) block copolymers I: Fluorinated side chains,” Macromolecules, 28, 331-335, (1995).

1800. Hwang, S.S., D.R. Iyengar, E.J. Kramer, and C.K. Ober, “Synthesis and characterization of fluorinated block copolymers for low surface energy applications,” Polymer, 36, 1321-1325, (1995).

1875. Huang, Y., D.J. Gardner, M. Chen, and C.J. Biermann, “Surface energetics and acid-base character of sized and unsized paper handsheets,” J. Adhesion Science and Technology, 9, 1403-1411, (1995).

1876. Li, D., and J. Zhao, “Surface biomedical effects of plasma on polyetherurethane,” J. Adhesion Science and Technology, 9, 1249-1261, (1995).

1877. Qin, X., and W.V. Chang, “Characterization of polystyrene surface by a modified two-liquid laser contact angle,” J. Adhesion Science and Technology, 9, 823-841, (1995).

1891. Friedrich, J.F., L. Wigant, W. Unger, et al, “Barrier properties of plasma-modified polypropylene and polyethylene terephthalate,” J. Adhesion Science and Technology, 9, 1165-1180, (1995) (also in Polymer Surface Modification: Relevance to Adhesion, K.L. Mittal, ed., p. 121-136, VSP, May 1996).

1892. Friedrich, J.F., W. Unger, A. Lippitz, et al, “The improvement in adhesion of polyurethane-polypropylene composites by short-time exposure of polypropylene to low and atmospheric pressure plasmas,” J. Adhesion Science and Technology, 9, 575-598, (1995) (also in Polymer Surface Modification: Relevance to Adhesion, K.L. Mittal, ed., p. 49-72, VSP, May 1996).

1893. Kruse, A., G. Krueger, A. Baalman, and O.-D. Henneman, “Surface pretreatment of plastics for adhesive bonding,” J. Adhesion Science and Technology, 9, 1611-1621, (1995) (also in Polymer Surface Modification: Relevance to Adhesion, K.L. Mittal, ed., p. 291-302, VSP, May 1996).

1894. Murahara, M., and M. Okoshi, “Photochemical surface modification of polypropylene for adhesion enhancement by using an excimer laser,” J. Adhesion Science and Technology, 9, 1593-1599, (1995) (also in Polymer Surface Modification: Relevance to Adhesion, K.L. Mittal, ed., p. 223-232, VSP, May 1996).

1895. Murahara, M., and K. Toyoda, “Excimer laser-induced photochemical modification and adhesion improvement of a fluororesin surface,” J. Adhesion Science and Technology, 9, 1601-1609, (1995).

1896. Hill, J.M., E. Karbashewski, A. Lin, M. Strobel, and M.J. Walzak, “Effects of aging and washing on UV- and ozone-treated poly(ethylene terephthalate) and polypropylene,” J. Adhesion Science and Technology, 9, 1575-1591, (1995) (also in Polymer Surface Modification: Relevance to Adhesion, K.L. Mittal, ed., p. 273-290, VSP, May 1996).

1897. Walzak, M.J., S. Flynn, R. Foerch, et al, “UV and ozone treatment of polypropylene and poly(ethylene terephthalate),” J. Adhesion Science and Technology, 9, 1229-1248, (1995) (also in Polymer Surface Modification: Relevance to Adhesion, K.L. Mittal, ed., p. 253-272, VSP, May 1996).

1898. Grundke, K., H.-J. Jacobasch, F. Simon, and S.T. Schneider, “Physico-chemical properties of surface-modified polymers,” J. Adhesion Science and Technology, 9, 327-350, (1995) (also in Polymer Surface Modification: Relevance to Adhesion, K.L. Mittal, ed., p. 431-454, VSP, May 1996).

1899. Greenwood, O.D., R.D. Boyd, J. Hopkins, and J.P.S. Badyal, “Atmospheric silent discharge versus low-pressure plasma treatment of polyethylene, polypropylene, polyisobutylene, and polystyrene,” J. Adhesion Science and Technology, 9, 311-326, (1995) (also in Polymer Surface Modification: Relevance to Adhesion, K.L. Mittal, ed., p. 17-32, VSP, May 1996).

1900. Lunkwitz, K., W. Burger, U. Lappan, H.-J. Brink, and A. Ferse, “Surface modification of fluoropolymers,” J. Adhesion Science and Technology, 9, 297-310, (1995).

2146. Finson, E., S.L. Kaplan, and L. Wood, “Plasma treatment of webs and films,” in 38th Annual Technical Conference Proceedings, Society of Vacuum Coaters, 1995.

2292. Strobel, M.A., M.J. Walzak, J.M. Hill, A.Lin, E. Karbashewski, and C.S. Lyons, “A comparison of gas-phase methods of modifying polymer surfaces,” J. Adhesion Science and Technology, 9, 365-383, (1995) (also in Polymer Surface Modification: Relevance to Adhesion, K.L. Mittal, ed., p. 233-252, VSP, May 1996).

2509. Denes, F., Z.Q. Hua, E. Barrios, R.A. Young, and J. Evans, “Influence of RF-cold plasma treatment on the surface properties of paper,” J. Macromolecular Science Part A: Pure and Applied Chemistry, 32, 1405-1443, (1995).

2767. Sherman, P.B., and M.P. Garrard, “Surface treatments for plastic films and containers,” in Plastics: Surface and Finish, 2nd Ed., Simpson, W.G., ed., 221-236, Royal Society of Chemistry, 1995.

2782. Etzler, F.M., M. Buche, J.F. Bobalek, and M.A. Weiss, “Surface free energy of paper and inks: Printability issues,” in 1995 Papermakers Conference Proceedings, 383-394, TAPPI Press, 1995.

2917. Janule, V.P., “On-site surface and wetting tension measurements of water-based coatings and substrates,” Pigment & Resin Technology, 24, 7-12, (1995).

1075. Novak, I, D. Lath, S. Florian, M. Dulaj, and J. Sestak, “Some methods for improving the adhesive properties of isotactic polypropylene, I: Modification of polypropylene surface properties via electrical discharge,” Fibres & Textiles in Eastern Europe, 3, 41-42, (Jan 1995).

1948. Jacobasch, H.J., K. Grundke, S. Schneider, and F. Simon, “Surface characterization of polymers by physico-chemical measurements,” J. Adhesion, 48, 57-73, (Jan 1995).

922. Podhajny, R.M., “Converters consultant: What can cause corona treated printed nylon film to block?,” Converting, 13, 14, (Feb 1995).

937. Griese, E.W. Jr., “Surface energy & printing success,” Cork Ind., Feb 1995.

1364. Chang, K., and R.K. Force, “Time-resolved pyrene fluorescence for determination of polymer surface polarity: correlations with surface tension,” Applied Spectroscopy, 49, 211-215, (Feb 1995).

1980. Frerichs, H., J. Stricker, D.A. Wesner, and E.W. Kreutz, “Laser-induced surface modification and metallization of polymers,” Applied Surface Science, 86, 405-410, (Feb 1995).

559. Schreiber, H.P., et al, “Inverse gas chromatography (IGC): a versatile tool for polymer surface characterization,” in ANTEC 95, Society of Plastics Engineers, Apr 1995.

586. van Ooij, W.J., et al, “Plasma-polymerized organic coatings deposited on metals from a DC plasma; characterization and applications of such surface modifications,” in ANTEC 95, Society of Plastics Engineers, Apr 1995.

<-- Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | 62 | 63 | 64 | 65 | 66 | 67 | 68 | 69 | 70 | 71 | 72 | 73 | 74 | 75 | 76 | Next-->